Michael Wensing

Prof. Dr.-Ing. Michael Wensing

Head of working group

Department of Chemical and Biological Engineering
Professur für Fluidsystemtechnik (FST)

Room 1.521
Cauerstraße 4
91058 Erlangen

Office hours

nach Vereinbarung

Braun K., Rüppel B., Weiß L., Wensing M.:
In-Situ Measurement Technique for Data Acquisition in Fuel Cells: Enabling Accurate Energy Balance Modeling
20th Symposium on Modeling and Validation of Electrochemical Energy Technologies ModVal 2024 (Trafo Baden, 13. March 2024 - 14. March 2024)
In: Book of Abstracts 20th Symposium on Modeling and Experimental Validation of Electrochemical Energy Technologies (ModVal 2024) 2024
DOI: 10.3929/ethz-b-000662523
Clemente Mallada R., Fajri H., Rieß S., Strauß L., Wensing M.:
Methanol – n-dodecane dual-fuel direct-injection combustion under compression ignition conditions in a constant flow chamber
ICLASS 2024 - 16th Triennial International Conference on Liquid Atomization and Spray Systems (Shanghai, 23. June 2024 - 27. June 2024)
Lindacher N., Weiß L., Rieß S., Wensing M.:
On the Anode Exhaust Gas Recirculation of PEM Fuel Cells Using Passive Ejectors
20th Symposium on Modeling and Experimental Validation of Electrochemical Energy Technologies (ModVal 2024) (Baden, 13. March 2024 - 14. March 2024)
In: P. Boillat, M. El Kazzi, J. Eller, C. Gloor, L. Gubler, J. Herranz, S. Trabesinger (ed.): Book of Abstracts 2024
DOI: 10.3929/ethz-b-000662523
Mull S., Weiß L., Wensing M.:
Experimental and simulative analysis of the dependence between liquid water amount and mass transfer in a planar membrane humidifier
20th Symposium on Modeling and Experimental Validation of Electrochemical Energy Technologies (ModVal 2024) (Baden, 13. March 2024 - 14. March 2024)
Mull S., Weiß L., Wensing M.:
High-load operating characteristics of planar membrane humidifiers of polymer electrolyte membrane fuel cell systems for heavy-duty applications
Energy & Propulsion Conference & Exhibition (Columbus, OH 43215, 12. November 2024 - 14. November 2024)
Römpke SM., Renner E., Mull S., Braun K., Weiß L., Wensing M., Schmauß B.:
Fiber Bragg Grating Temperature Sensing in Fuel Cells
2024 IEEE Photonics Conference (IPC)
Rüppel B., Lehnert B., Weiß L., Wensing M.:
Long-Term Continuous Gas Diagnostics For Fuel Cell Systems: Development Of An Automatized Raman Metrology
21st International Symposium on Application of Laser and Imaging Techniques to Fluid Mechanics (Lissabon, 8. July 2024 - 11. July 2024)
DOI: 10.55037/lxlaser.21st.34
Strauß L., Rieß S., Clemente Mallada R., Wensing M.:
Influence of injection pressure on ignition delay and lift-off length of eFuels
ICLASS 2024 - 16th Triennial International Conference on Liquid Atomization and Spray Systems (Shanghai, 23. June 2024 - 27. June 2024)
Strauß L., Weiß L., Rieß S., Wensing M.:
Einspritzung, Mischung und Selbstzündung von E-Kraftstoffen für kompressionsgezündete Motoren
In: MTZ Motortechnische Zeitschrift 85 (2024), p. 58-61
ISSN: 0024-8525
DOI: 10.1007/s35146-023-1573-z
Strauß L., Weiß L., Rieß S., Wensing M.:
Injection, Mixing and Auto-ignition of E-fuels for Compression Ignition Engines
In: MTZ worldwide 85 (2024), p. 54-57
ISSN: 2192-9114
DOI: 10.1007/s38313-023-1569-6
Weiß L., Rüppel B., Weiß T., Wensing M.:
Cross-plane PIV for the characterization of low viscosity viscoelastic fluids
21st LISBON Laser Symposium 2024 (Lisbon, 7. August 2024 - 11. August 2024)
Wiesmann F., Han D., Qiu Z., Strauß L., Rieß S., Wensing M., Lauer T.:
Numerical study of novel OME1−6 combustion mechanism and spray combustion at changed ambient environments
In: Frontiers of Energy (2024)
ISSN: 2095-1701
DOI: 10.1007/s11708-024-0926-8

AU., Lehnert B., Zhu S., Révidat S., Shirley M., Pyo Ha K., Wensing M., Ullrich J.:
Experimental Study of High-Pressure Reacting and Non-reacting Sprays for Various Gasoline Blends
In: SAE International Journal of Fuels and Lubricants 17 (2023), Article No.: 04-17-02-0009
ISSN: 1946-3952
DOI: 10.4271/04-17-02-0009
Braun K., Mahayni Y., Thiele S., Weiß L., Wensing M.:
2-Propanol Fuel Cell System
EFCF 2023: Low-Temp. Fuel Cells, Electrolysers & H2 Processing (Luzern, 4. July 2023 - 7. July 2023)
Clemente Mallada R., Peter A., Rieß S., Strauß L., Fajri H., Wensing M.:
Methane Concentration Influence on Combustion in a Rapid Compression Machine under DFICE Relevant Conditions
In: Journal of Mechanics Engineering and Automation 13 (2023)
ISSN: 2163-2405
DOI: 10.17265/2159-5275/2023.02.003
Fajri H., Rieß S., Clemente Mallada R., Ruoff I., Wensing M.:
Optical measurements of two cylindrical and conical heavy-duty diesel injector nozzels – A comparison of reference diesel, HVO, and RME fuels
In: Energy Conversion and Management 285 (2023), Article No.: 117018
ISSN: 0196-8904
DOI: 10.1016/j.enconman.2023.117018
Haspel P., Gierth S., Popp S., Scholtissek A., Rieß S., Wensing M., Hasse C.:
Large eddy simulation of OME3 and OME4 spray combustion under heavy-duty conditions
In: Fuel 353 (2023), Article No.: 129097
ISSN: 0016-2361
DOI: 10.1016/j.fuel.2023.129097
Lehnert B., Stiti M., Wensing M., Berrocal E.:
3D tomographic reconstruction of Spray G after multiple light scattering suppression using Fourier filtering
Liquid Atomization and Spray Systems Europe 2023 (Neapel, 4. September 2023 - 7. September 2023)
Lehnert B., Weiß L., Berrocal E., Wensing M.:
Quantifying extinction imaging of fuel sprays considering scattering errors
In: International Journal of Engine Research (2023)
ISSN: 1468-0874
DOI: 10.1177/14680874231167931
Lindacher N., Weiß L., Rieß S., Wensing M.:
Modeling of ejectors applied in PEMFC systems 2
EFCF 2023: Low-Temp. Fuel Cells, Electrolysers & H2 Processing (Luzern, 4. July 2023 - 7. July 2023)
Lindacher N., Weiß L., Rieß S., Wensing M.:
Modeling of ejectors applied in PEMFC systems
ModVal 2023 - 19th Symposium on Fuel Cell and Battery Modeling and Experimental Validation (Duisburg, 21. March 2023 - 23. March 2023)
Mull S., Weiß L., McMackin M., Wensing M.:
Membrane humidifier model for PEM fuel cell systems
European Fuel Cell Forum 2023 (Lucerne, 4. July 2023 - 7. July 2023)
Mull S., Weiß L., Wensing M.:
Membrane humidifier model for PEM fuel cell systems
19th Symposium on Fuel Cell and Battery Modeling and Experimental Validation (Duisburg, 21. March 2023 - 23. March 2023)
Potrykus F., Pircher T., Wensing M., Schlücker E.:
Analysing the Influence of High Transient Current Flow on White Etching Cracks in Roller Element Bearings
International Tribology Conference (Fukuoka, 25. September 2023 - 30. September 2023)
Potrykus F., Wensing M., Schlücker E.:
Analysing the DC Voltage Response of Roller Element Bearings under WEC-Critical Conditions
European Conference on Tribology (Bari, 21. June 2023 - 23. June 2023)
Singer C., Hahn C., Phan DQ., Russwurm T., Wensing M., Koegl M., Zigan L., Kureti S.:
Oxidation of soot in gasoline exhaust on Mn2O3 catalyst
In: Applied Catalysis A-General 663 (2023), Article No.: 119316
ISSN: 0926-860X
DOI: 10.1016/j.apcata.2023.119316
Singer C., Hahn C., Phan DQ., Russwurm T., Wensing M., Koegl M., Zigan L., Kureti S.:
Oxidation of soot in gasoline exhaust on Mn2O3 catalyst
In: Applied Catalysis A-General (2023), p. 119316
ISSN: 0926-860X
DOI: 10.1016/j.apcata.2023.119316
Strauß L., Rieß S., Wensing M.:
Investigation of Fuel Sprays Using an IR-based Measurement Technique
11th International Conference “Fuel Science - From Production to Propulsion” (Aachen, 23. May 2023 - 25. May 2023)
Strauß L., Rieß S., Wensing M.:
Mixture formation of OME3−5 and 1-Octanol in comparison with diesel-like Dodecane under ECN Spray A conditions
In: Frontiers in Mechanical Engineering 9 (2023)
ISSN: 2297-3079
DOI: 10.3389/fmech.2023.1083658

Braun K., Wolf M., de Oliveira A., Preuster P., Wasserscheid P., Thiele S., Weiß L., Wensing M.:
Energetics of Technical Integration of 2-Propanol Fuel Cells: Thermodynamic and Current and Future Technical Feasibility
In: Energy Technology (2022)
ISSN: 2194-4288
DOI: 10.1002/ente.202200343
Fajri H., Clemente Mallada R., Rieß S., Strauß L., Wensing M.:
Mixture Formation Analysis for Diesel, n-Dodecane, RME, and HVO in Large-Scale Injector Nozzles
CO2 Reduction for Transportation Systems Conference (Turin, 21. June 2022 - 22. June 2022)
DOI: 10.4271/2022-37-0020
URL: https://saemobilus.sae.org/content/2022-37-0020/
Guenot D., Svendsen K., Lehnert B., Ulrich H., Persson A., Permogorov A., Zigan L., Wensing M., Lundh O., Berrocal E.:
Distribution of Liquid Mass in Transient Sprays Measured Using Laser-Plasma-Driven X-Ray Tomography
In: Physical Review Applied 17 (2022), Article No.: 064056
ISSN: 2331-7019
DOI: 10.1103/PhysRevApplied.17.064056
Huber K., Gackstatter F., Roediger T., Wensing M.:
Highly time-resolved heat flux measurement in a combustion engine
In: International Journal of Engine Research (2022)
ISSN: 1468-0874
DOI: 10.1177/14680874221118970
Lehnert B., Weiß L., Berrocal E., Wensing M.:
The 10th International Conference on Modeling and Diagnostics for Advanced Engine Systems
COMODIA2022 (Saporro, 5. July 2022 - 8. July 2022)
Rieß S., Wensing M.:
Wasserstoff als alternativer Energieträger
Kraftstoffe für die Mobilität von morgen – 5. Tagung der Fuels Joint Research Group (Waischenfeld, 30. June 2022 - 1. July 2022)
In: Jürgen Krahl, Axel Munack, Peter Eilts, Jürgen Bünger (ed.): Kraftstoffe für die Mobilität von morgen, Göttingen: 2022
URL: https://www.fuels-jrg.de/app/download/9917084969/FJRG_2022.pdf?t=1657625812
Russwurm T., Achenbach T., Wensing M.:
Investigations on lean and EGR-diluted combustion with active Pre-Chamber Ignition using a 1D-simulation model
International Conference on Ignition Systems for Gasoline Engines – International Conference on Knocking in Gasoline Engines (Berlin, 13. September 2022 - 14. September 2022)
In: Sens, Marc (ed.): International Conference on Ignition Systems for Gasoline Engines – International Conference on Knocking in Gasoline Engines, Berlin: 2022
DOI: 10.24053/9783816985440
Russwurm T., Peter A., Rieß S., Wensing M.:
Measurement techniques for active pre-chamber ignition systems: optical experiments and thermodynamic evaluation
The 10th International Conference on Modeling and Diagnostics for Advanced Engine Systems (Sapporo, Japan, 5. July 2022 - 8. July 2022)
In: The Japan Society of Mechanical Engineers (JSME) (ed.): Proceedings of the COMODIA2022 2022
DOI: 10.1299/jmsesdm.2022.10.a2-1
Russwurm T., Peter A., Strauß L., Rieß S., Wensing M.:
Investigations on an active pre-chamber ignition system in a combustion chamber
In: International Journal of Engine Research (2022)
ISSN: 1468-0874
DOI: 10.1177/14680874221120140
Schwarz P., Blume M., Weiß L., Wensing M., Skoda R.:
3D simulation of a ballistic direct injection cycle for the assessment of fuel property effects on cavitating injector internal flow dynamics and primary breakup
In: Fuel 308 (2022), Article No.: 121775
ISSN: 0016-2361
DOI: 10.1016/j.fuel.2021.121775
Stiti M., Lehnert B., Wensing M., Berrocal E.:
Multiple scattering suppression for correct light transmission measurements through the ECN Spray G running with ethanol
31th Conference on Liquid Atomization and Spray Systems (Virtuell, 6. September 2022 - 8. September 2022)
Strauß L., Peter A., Rieß S., Wensing M.:
Mixture Formation and Ignition of Dodecane and OME3-5
5. FJRG Tagung - Kraftstoffe für die Mobilität von Morgen (Waischenfeld, 30. June 2022 - 1. July 2022)
Strauß L., Peter A., Rieß S., Wensing M.:
Mixture Formation and Ignition of Dodecane and OME3-5
10th International Conference “Fuel Science - From Production to Propulsion” (Aachen, 10. May 2022 - 12. May 2022)
Strauß L., Peter A., Rieß S., Wensing M.:
Mixture Formation of OME3-5 and 1-Octanol in comparison to diesel-like Dodecane under ECN Spray A Conditions
COMODIA2022 (Sapporo, 5. July 2022 - 8. July 2022)
Ulrich H., Lehnert B., Guenot D., Svendsen K., Lundh O., Wensing M., Berrocal E., Zigan L.:
Effects of liquid properties on atomization and spray characteristics studied by planar two-photon fluorescence
In: Physics of Fluids 34 (2022), Article No.: 083305
ISSN: 1070-6631
DOI: 10.1063/5.0098922

Mamaikin D., Knorsch T., Rogler P., Wang J., Wensing M.:
The effect of transient needle lift on the internal flow and near-nozzle spray characteristics for modern GDI systems investigated by high-speed X-ray imaging
In: International Journal of Engine Research (2021)
ISSN: 1468-0874
DOI: 10.1177/1468087420986751
Rezaei J., Rieß S., Wensing M.:
Phase change in fuel sprays at diesel engine ambient conditions: Impact of fuel physical properties
In: Journal of Supercritical Fluids 170 (2021), Article No.: 105130
ISSN: 0896-8446
DOI: 10.1016/j.supflu.2020.105130
Rieß S., Rezaei J., Weiß L., Peter A., Wensing M.:
Phase change in fuel sprays at diesel engine ambient conditions: Modeling and experimental validation
In: Journal of Supercritical Fluids 173 (2021), Article No.: 105224
ISSN: 0896-8446
DOI: 10.1016/j.supflu.2021.105224
Russwurm T., Wensing M., Euchner L., Janas P.:
Flame Luminesce in an Optically Accessible Engine with an Active Fuelled Pre-Chamber Ignition System
In: Michael Bargende, Hans-Christian Reuss, Andreas Wagner (ed.): 21. Internationales Stuttgarter Symposium, Springer Verlag, 2021, p. 397-410
ISBN: 9783658335205
DOI: 10.1007/978-3-658-33521-2_27
Ulrich H., Lehnert B., Guenot D., Svendsen K., Lundh O., Will S., Wensing M., Berrocal E., Zigan L.:
Analysis of liquid spray structures using two-photon fluorescence laser sheet imaging
15th ICLASS 2021 (Edinburgh, Scotland, 29. August 2021 - 2. September 2021)
In: Vol 1 No 1 (2021): ICLASS Edinburgh 2021 2021
DOI: 10.2218/iclass.2021.6139
(online publication)
Wensing M., Rieß S., Mamaikin D., Conrad C., Neubauer A.:
Experimental Diagnostics and Investigations on Cavitation in Engine Injector Nozzles
In: Phoevos Koukouvinis, Manolis Gavaises (ed.): Cavitation and Bubble Dynamics – Fundamentals and Applications, Academic Press, 2021, p. 265 – 302
ISBN: 978-0-12-823388-7
DOI: 10.1016/b978-0-12-823388-7.00002-3

Blume M., Schwarz P., Rusche H., Weiß L., Wensing M., Skoda R.:
3D Simulation of Turbulent and Cavitating Flow for the Analysis of Primary Breakup Mechanisms in Realistic Diesel Injection Processes
In: Atomization and Sprays (2020), p. 861-893
ISSN: 1044-5110
DOI: 10.1615/AtomizSpr.2020032492
Conrad C., Bornschlegel S., Durst A., Jordan D., Wensing M.:
Influence of the nozzle geometry on in-nozzle cavitation investigated in real-size glass nozzles with shadowgraphy and LIF
14th International Conference on Liquid Atomization and Spray Systems, ICLASS 2018 (Chicago, IL, 22. July 2018 - 26. July 2018)
In: ICLASS 2018 - 14th International Conference on Liquid Atomization and Spray Systems 2020
Conrad C., Wensing M.:
Influence of Nozzle Geometry Parameters on the Propagation of Fuel Spray Investigated with Linear and Non-Linear Regression Models
In: SAE Technical Papers (2020)
ISSN: 0148-7191
DOI: 10.4271/2020-01-2114
Frühhaber J., Peter A., Schuh S., Lauer T., Wensing M., Winter F., Priesching P., Pachler K.:
Numerical investigation of inert and reactive spray characteristics during pilot injection of a dual fuel injector
6th ECCOMAS European Conference on Computational Mechanics: Solids, Structures and Coupled Problems, ECCM 2018 and 7th ECCOMAS European Conference on Computational Fluid Dynamics, ECFD 2018 (Glasgow, 11. June 2018 - 15. June 2018)
In: Roger Owen, Rene de Borst, Jason Reese, Chris Pearce (ed.): Proceedings of the 6th European Conference on Computational Mechanics: Solids, Structures and Coupled Problems, ECCM 2018 and 7th European Conference on Computational Fluid Dynamics, ECFD 2018 2020
Lehnert B., Conrad C., Wensing M.:
GDI Sprays with up to 200 MPa Fuel Pressure and Comparison of Diesel-like and Gasoline-Like Injector Designs
In: SAE Technical Papers (2020)
ISSN: 0148-7191
DOI: 10.4271/2020-01-2104
Mamaikin D., Knorsch T., Rogler P., Wensing M.:
Experimental investigation of flow field and string cavitation inside a transparent real-size GDI nozzle
In: Experiments in Fluids 61 (2020), Article No.: 154
ISSN: 0723-4864
DOI: 10.1007/s00348-020-02982-y
Peter A., Rieß S., Wensing M., Braeuer AS., Klima TC.:
Quantification of mixture composition, liquid-phase fraction and - temperature in transcritical sprays
In: Journal of Supercritical Fluids 159 (2020), Article No.: 104777
ISSN: 0896-8446
DOI: 10.1016/j.supflu.2020.104777
Peter A., Siewert B., Rieß S., Strauß L., Pastoetter C., Wensing M.:
MIXTURE FORMATION ANALYSIS OF POLYOXYMETHYLENETHER INJECTION
In: Atomization and Sprays 30 (2020), p. 843-859
ISSN: 1044-5110
DOI: 10.1615/AtomizSpr.2020035250
URL: http://www.dl.begellhouse.com/journals/6a7c7e10642258cc,2cbfd3431f4f92c4,1170247835c242b7.html
Russwurm T., Peter A., Weiß L., Rieß S., Wensing M.:
Optical Investigations on the Jet Propagation of an Actively Fuelled Pre-Chamber Ignition System with Highspeed Schlieren Imaging
THIESEL 2020 Thermo- and Fluid dynamic Processes in Direct Injection Engines (Valencia, 8. September 2020 - 11. September 2020)
In: Editorial Universitat Politècnica de València (ed.): THIESEL 2020.Thermo-and Fluid Dynamic Processes in Direct Injection Engines.8th-11th September 2020
Open Access: https://riunet.upv.es/handle/10251/150759
URL: https://riunet.upv.es/handle/10251/150759
Russwurm T., Schumacher M., Wensing M.:
Active Fuelling of a Passenger Car Sized Pre-Chamber Ignition System with Gaseous Components of Gasoline
In: SAE Technical Papers (2020)
ISSN: 0148-7191
DOI: 10.4271/2020-01-2045
Russwurm T., Schumacher M., Wensing M.:
Pre-Chamber ignition system with active fuelling: an enabler for homogeneous lean and diluted combustion processes
14th International AVL Symposium on Propulsion Diagnostics (Baden-Baden, 23. June 2020 - 24. June 2020)
In: 14th International AVL Symposium on Propulsion Diagnostics 2020
URL: https://www.avl.com/web/de/-/14th-international-avl-symposium-on-propulsion-diagnostics
Weiß L., Wensing M., Hwang J., Pickett LM., Skeen SA.:
Development of limited-view tomography for measurement of Spray G plume direction and liquid volume fraction
In: Experiments in Fluids 61 (2020), Article No.: 51
ISSN: 0723-4864
DOI: 10.1007/s00348-020-2885-0
URL: https://link.springer.com/article/10.1007/s00348-020-2885-0
Zueva TS., Weiß L., Wensing M., Garyaev AB.:
Experimental investigation of spray propagation under crossflow conditions with Shadowgraph and Schlieren techniques
3rd Conference on Problems of Thermal Physics and Power Engineering, PTPPE 2020 (Moscow, 19. October 2020 - 23. October 2020)
In: Journal of Physics: Conference Series 2020
DOI: 10.1088/1742-6596/1683/2/022061

Berrocal E., Conrad C., Puls J., Arnold CL., Wensing M., Linne M., Miranda M.:
Two-photon fluorescence laser sheet imaging for high contrast visualization of atomizing sprays
In: OSA Continuum 2 (2019), p. 983-993
ISSN: 2578-7519
DOI: 10.1364/OSAC.2.000983
Bornschlegel S., Conrad C., Durst A., Welß R., Wensing M., Olbinado M., Helfen L., Baumbach T.:
The influence of superheated injection on liquid and gaseous flow field of an experimental single-hole gasoline direct injection injector
In: International Journal of Engine Research (2019)
ISSN: 1468-0874
DOI: 10.1177/1468087419858464
Durst A., Russwurm T., Strauß L., Wensing M.:
Liquid Organic Hydrogen Carriers as chemical hydrogen storage – Opportunities and challenges of reconversion into electricity with combustion engines
13. Tagung Gasfahrzeuge - eine nachhaltige Alternative (Stuttgart, 19. October 2019 - 20. October 2019)
Durst A., Wensing M., Gröger K., Kawaharada N., Dinkelacker F., Wang J.:
Measurement Techniques for the Investigation of the Primary Atomization of Fuel Sprays
Workshop ENCOM 2019, Waischenfeld, 16./17.10.2019 (Fraunhofer Forschungscampus Waischenfeld, 16. October 2019 - 17. October 2019)
Peter A., Rieß S., Weiß L., Wensing M.:
An Inside View on Diesel Sprays: From Quantitative 1D-Measurements to an In Depth 2D-Analysis of Mixture Composition
Workshop ENCOM 2019, Waischenfeld, 16./17.10.2019 (Fraunhofer Forschungscampus Waischenfeld, 16. October 2019 - 17. October 2019)
Peter A., Rieß S., Weiß L., Wensing M.:
Time-resolved chemiluminescence spectroscopy of diesel and alternative fuel flames at engine relevant ambient conditions
European Combustion Meeting (ECM) (Lissabon)
Pickl F., Russer M., Hauenstein M., Wensing M.:
Modelling and understanding deposit formation and reduction in combustion engines – Application to the concrete case of internal GDI injector deposit
In: Fuel 236 (2019), p. 284-296
ISSN: 0016-2361
DOI: 10.1016/j.fuel.2018.08.139
Rezaei J., Rieß S., Peter A., Wensing M.:
Investigation the Impact of Fuel Properties on Diesel Spray Phase Change
29th European Conference Liquid Atomization & Spray Systems (Paris, 2. September 2019 - 4. September 2019)
In: Frankreich 2019
Open Access: https://ilass19.sciencesconf.org
URL: https://ilass19.sciencesconf.org/browse/author?authorid=672147
Rowane AJ., Mahesh Babu V., Rokni HB., Moore JD., Gavaises M., Wensing M., Gupta A., McHugh MA.:
Effect of Composition, Temperature, and Pressure on the Viscosities and Densities of Three Diesel Fuels
In: Journal of Chemical and Engineering Data (2019)
ISSN: 0021-9568
DOI: 10.1021/acs.jced.9b00652
Russwurm T., Schumacher M., Wensing M.:
Pre-Chamber Ignition System for Diluted Combustion Processes with Active Fuelling by Volatile Fuel Components
Workshop ENCOM 2019, Waischenfeld, 16./17.10.2019 (Fraunhofer Forschungscampus Waischenfeld, 16. October 2019 - 17. October 2019)
Russwurm T., Wensing M.:
Active Pre-chamber Ignition Systems: An Enabler for New ICE Combustion Concepts
9th European Combustion Meeting (ECM2019) (Lissabon, 14. April 2019 - 17. April 2019)
Weiß L., Wensing M., Engl N., Siegel F., Tilinski M., Zülow D., Passily L.:
Local Heat Transfer and Interdependency of Piston Material, Spray and Combustion in High Power Diesel Engines
Workshop ENCOM 2019, Waischenfeld, 16./17.10.2019 (Fraunhofer Forschungscampus Waischenfeld, 16. July 2019 - 17. July 2019)
Wensing M.:
Quo Vadis Combustion Engine?
Workshop ENCOM 2019, Waischenfeld, 16./17.10.2019 (Keynote Lecture) (Fraunhofer Forschungscampus Waischenfeld, 16. October 2019 - 17. October 2019)

Berrocal E., Conrad C., Miranda M., Püls J., Arnold CL., Wensing M., Linne M.:
Imaging atomizing sprays with high visibility using two-photon fluorescence laser sheet imaging
ICLASS 2018, 14th Triennial International Conference on Liquid Atomization and Spray Systems (Chicago, IL, 22. July 2018 - 26. July 2018)
URL: http://ilasseurope.org/events/iclass-2018/
Berrocal E., Miranda M., Conrad C., Püls J., Arnold CL., Wensing M., Linne M.:
Two-photon fluorescence laser sheet imaging for analyzing turbid two-phase flows: Application to transient atomizing sprays
19th International Symposium on Applications of Laser and Imaging Techniques to Fluid Mechanics (Lisbon, 16. July 2018 - 19. July 2018)
Bornschlegel S., Welß R., Durst A., Conrad C., Wensing M., Jestrovic S.:
Effect of superheated fuel on air entrainment under GDI-relevant boundary conditions measured with FPIV
19th International Symposium on the Application of Laser and Imaging Techniques to Fluid Mechanics (Lissabon, 16. July 2018 - 19. July 2018)
URL: https://www.researchgate.net/publication/326579552_Effect_of_superheated_fuel_on_air_entrainment_under_GDI-relevant_boundary_conditions_measured_with_FPIV
Boese, L., Opferkuch, F., Becker, J., & Wensing, M.:
Dynamic modeling of flow boiling within plate heat exchangers for heat pump and refrigeration applications
IGSHPA Research Track (Stockholm, 18. September 2018 - 20. September 2018)
DOI: 10.22488/okstate.18.000010
Conrad C., Bornschlegel S., Durst A., Jordan D., Wensing M.:
Influence of the nozzle geometry on in-nozzle cavitation investigated in real-size glass nozzles with shadowgraphy and LIF
ICLASS 2018, 14th Triennial International Conference on Liquid Atomization and Spray Systems (Chicago, IL, 22. July 2018 - 26. July 2018)
URL: http://ilasseurope.org/events/iclass-2018/
Durst A., Wang J., Wensing M.:
Investigating Primary Spray Structures of Diesel Sprays with an Optimized Light Sheet Fluorescence Imaging Approach and X-Ray Phase Contrast Imaging
19th International Symposium on the Application of Laser and Imaging Techniques to Fluid Mechanics (Lissabon, 16. July 2018 - 19. July 2018)
Durst A., Wensing M., Berrocal E.:
Light sheet fluorescence microscopic imaging for the primary breakup of diesel and gasoline sprays with real-world fuels
In: Applied Optics 57 (2018), p. 2704-2714
ISSN: 1559-128X
DOI: 10.1364/AO.57.002704
Frühhaber J., Peter A., Schuh S., Lauer T., Wensing M., Winter F., Priesching P., Pachler K.:
Modeling the Pilot Injection and the Ignition Process of a Dual Fuel Injector with Experimental Data from a Combustion Chamber Using Detailed Reaction Kinetics
International Powertrains, fuels & lubricants meeting SAE (Heidelberg)
DOI: 10.4271/2018-01-1724.
Frühhaber J., Peter A., Schuh S., Lauer T., Wensing M., Winter F., Priesching P., Pachler K.:
Modeling the Pilot Injection and the Ignition Process of a Dual Fuel Injector with Experimental Data from a Combustion Chamber Using Detailed Reaction Kinetics
In: SAE Technical Papers 2018-September (2018)
ISSN: 0148-7191
DOI: 10.4271/2018-01-1724
Frühhaber J., Peter A., Schuh S., Lauer T., Wensing M., Winter F., Priesching P., Pachler K.:
Numerical investigation of the spray characteristics during pilot injection of a dual fuel injector
7th European Conference on Computation Fluid Dynamics (ECFD) (Glasgow)
Gröger K., Durst A., Dinkelacker F., Wensing M.:
Messtechnische Erfassung des Strahlaufbruchs von Dieselsprays im Düsennahbereich
FVV-Frühjahrstagung 2018 (Bad Neuenahr, 22. March 2018 - 23. March 2018)
Klima TC., Peter A., Wensing M., Braeuer AS.:
Tracer-free fuel-air ratio measurements & thermodynamic phase determination in diesel sprays by Raman spectroscopy
14th International Conference on Liquid Atomization and Spray Systems, ICLASS 2018 (Chicago, 22. July 2018 - 26. July 2018)
In: ICLASS 2018 - 14th International Conference on Liquid Atomization and Spray Systems 2018
Marcic S., Marcic M., Wensing M., Vogel T., Praunseis Z.:
A simplified model for a diesel spray
In: Fuel 222 (2018), p. 485-495
ISSN: 0016-2361
DOI: 10.1016/j.fuel.2018.02.152
Peter A., Frühhaber J., Schuh S., Lauer T., Winter F., Priesching P., Wensing M.:
Flame quenching during dual-fuel operation investigated in experiments and simulation
Conference on Thermo- and Fluid Dynamic Processes in Direct Injection Engines (THIESEL) (Valencia, 11. September 2018 - 14. September 2018)
Peter A., Rieß S., Weiß L., Braeuer AS., Wensing M., Klima TC.:
Quantitative mixture formation analysis of diesel sprays
14th International Conference on Liquid Atomization and Spray Systems, ICLASS 2018 (Chicago, IL, 22. July 2018 - 26. July 2018)
In: ICLASS 2018 - 14th International Conference on Liquid Atomization and Spray Systems 2018
Peter A., Rieß S., Weiß L., Wensing M.:
Influence of e-fuels on mixture formation and combustion investigated in a high-pressure combustion vessel
6. Internationale TMFB Konferenz (Aachen, 6. June 2018 - 6. June 2018)
Rezaei J., Rieß S., Peter A., Weiß L., Wensing M.:
Investigation of Phase Change Mechanisms of n-Alkanes Injected in sub- and Supercritical Conditions
ICLASS 2018, 14th Triennial International Conference on Liquid Atomization and Spray Systems (Chicago, IL, USA, 22. July 2018 - 26. July 2018)
Rieß S., Durst A., Wensing M., Wang J.:
An advanced optical metrology view on mixture formation in Diesel sprays
13th International AVL Symposium on Propulsion Diagnostics (Baden-Baden, 26. June 2018 - 27. June 2018)
Rieß S., Weiß L., Peter A., Rezaei J., Wensing M.:
Air entrainment and mixture distribution in Diesel sprays investigated by optical measurement techniques
In: International Journal of Engine Research 19 (2018), p. 120-133
ISSN: 1468-0874
DOI: 10.1177/1468087417742527
Schumacher M., Russwurm T., Wensing M.:
Pre-chamber Ignition System for Homogeneous Lean Combustion Processes with Active Fuelling by Volatile Fuel Components
Ignition Systems for Gasoline Engines 4th International Conference (Berlin, 6. December 2018 - 7. December 2018)
In: Michael Günther, Marc Sens (ed.): Ignition Systems for Gasoline Engines 2018
Welß R., Bornschlegel S., Wensing M.:
Characterizing Spray Propagation of GDI Injectors under Crossflow Conditions
In: SAE Technical Papers 2018-September (2018)
ISSN: 0148-7191
DOI: 10.4271/2018-01-1696

Bhattacharya A., Datta A., Wensing M.:
Laminar burning velocity and ignition delay time for premixed isooctane–air flames with syngas addition
In: Combustion Theory and Modelling 21 (2017), p. 228-247
ISSN: 1364-7830
DOI: 10.1080/13647830.2016.1215533
Bornschlegel S., Conrad C., Durst A., Wang J., Wensing M.:
Multi-hole gasoline direct injection: In-nozzle flow and primary breakup investigated in transparent nozzlesand with X-ray
In: International Journal of Engine Research 19 (2017), p. 67-77
ISSN: 1468-0874
DOI: 10.1177/1468087417746860
Bornschlegel S., Conrad C., Durst A., Wensing M.:
Multi-Hole Gasoline Direct Injection: In-Nozzle Flow and Primary Breakup Investigated in Transparent Nozzles and with X-Ray
Motorische Verbrennung - Aktuelle Probleme und moderne Lösungsansätze (Ludwigsburg, 16. March 2017 - 17. March 2017)
Bornschlegel S., Conrad C., Eichhorn L., Wensing M.:
Flashboiling atomization in nozzles for GDI engines
28th Conference of Liquid Atomization and Spray Systems ILASS 2017, 6.-8.9.2017, Valencia. Spain (Valencia, 6. September 2017 - 8. September 2017)
DOI: 10.4995/ILASS2017.2017.4750
R. Distler, C. Hamann, M. Krämer, E. Kull, M. Wensing, Z. Li, Y. Gao, J. Wang:
High Speed X-Ray Imaging for Nozzle Exit Velocity and Density Distribution Measurements of GDI Nozzles
28th Conference of Liquid Atomization and Spray Systems, 6.-8.9.2017, Valencia. Spain (Valencia, 6. September 2017 - 8. September 2017)
Distler R., Krämer M., Kull E., Wensing M.:
Spray Characterization of Mulithole GDI Injectors with Spray Momentum Measurements
International Congress Engine Combustion Processes (Ludwigsburg, 16. March 2017 - 17. March 2017)
Friedrich W., Grzeszik R., Lauschke P., Zelenov V., Wensing M.:
The Impact of a Combustion Chamber Optimization on the Mixture Formation and Combustion in a CNG-DI Engine in Stratified Operation
In: SAE Technical Papers 2017-March (2017)
ISSN: 0148-7191
DOI: 10.4271/2017-01-0779
Grasreiner S., Neumann J., Wensing M., Hasse C.:
Model-based virtual engine calibration with the help of phenomenological methods for spark-ignited engines
In: Applied Thermal Engineering 121 (2017), p. 190-199
ISSN: 1359-4311
DOI: 10.1016/j.applthermaleng.2017.04.046
Knorsch T., Mamaikin D., Leick P., Rogler P., Wang J., Li Z., Wensing M.:
Comparison of Shadowgraph Imaging, Laser-Doppler Anemometry and X-Ray Imaging for the Analysis of Near Nozzle Velocities of GDI Fuel Injectors
In: SAE Technical Papers 2017-October (2017)
ISSN: 0148-7191
DOI: 10.4271/2017-01-2302
Mamaikin D., Knorsch T., Rogler P., Leick P., Wensing M.:
High Speed Shadowgraphy of Transparent Nozzles as an Evaluation Tool for In-Nozzle Cavitation Behavior of GDI Injectors
ILASS–Europe 2017, 28th Conference on Liquid Atomization and Spray Systems (Valencia, 6. September 2017 - 8. September 2017)
DOI: 10.4995/ILASS2017.2017.4639
Peter A., Rieß S., Wensing M., Frühhaber J., Lauer T.:
Investigation of Mixture Formation and Flammability of Natural Gas and Diesel under Dual Fuel Operating Conditions in the Limits of Flame-quenching and Knocking
The 9th International Conference on Modelling and Diagnostics for Advanced Engine Systems (Okayama Convention Center, 25. July 2017 - 28. July 2017)
Pickl F., Hecker M., Hauenstein M., Wensing M.:
Untersuchung der Langzeitverkokung von Hochdruckeinspritzventilen – Ein Modell zur Analyse von Aufbau, Abbau und Langzeitverhalten
16. Tagung: „Der Arbeitsprozess des Verbrennungsmotors“, 28.-29.9.2017, Graz (Graz, 28. September 2017 - 29. September 2017)
Rieß S., Weiß L., Peter A., Durst A., Wensing M.:
Processes in Diesel Sprays Investigated by Schlieren Technique and Raman Spectroscopy
International Congress on Engine Combustion Processes (ENCOM) (Ludwigsburg)
Rieß S., Weiß L., Rezaei J., Peter A., Wensing M.:
The liquid penetration of diesel substitutes
28th Conference of Liquid Atomization and Spray Systems ILASS 2017, 6.-8.9.2017, Valencia. Spain (Valencia, 6. September 2017 - 8. September 2017)
DOI: 10.4995/ILASS2017.2017.4764
Schumacher M., Wensing M.:
Combustion process development for a SI engine with low pressure hydrogen direct injection
7th World Hydrogen Technologies Convention (Prague, 9. July 2017 - 12. July 2017)
Schumacher M., Wensing M.:
Combustion Process Development for Low Pressure Hydrogen Direct Injection
12. Tagung Gasfahrzeuge. 24-25 Oktober 2017, Stuttgart (Stuttgart, 24. October 2017 - 25. October 2017)
F. Schwerdt, R. Messing, C. Sauer, C. Schwarz, M. Schenk, F. X. Schauer, M. Wensing:
Potential for the Extension of the Knocking Limit by Miller Strategies and Diluted Gasoline Combustion Processes
5. Internationale Tagung Ottomotorisches Klopfen, 12./13.12.2017, Berlin (Berlin, 12. December 2017 - 13. December 2017)
Weiß L., Wensing M.:
Correlation between Piston Surface Temperature and Piston Material and Their Influence on Spray-Wall-Interaction and Spray Combustion
The 9th International Conference on Modelling and Diagnostics for Advanced Engine Systems (COMODIA 2017) (Okayama Convention Center, 25. July 2017 - 28. July 2017)
Welß R., Seeger J., Deinhard B., Wensing M.:
Correlating Gasoline Spray Propagation in Constant Volume Chamber and Optically Accessible Engines
COMODIA 2017 Int. Conference (Okayama Convention Center, 25. July 2017 - 28. July 2017)
Zaremba M., Weiß L., Maly M., Wensing M., Jedelsky J., Jicha M.:
Low-pressure twin-fluid atomization: Effect of mixing process on spray formation
In: International Journal of Multiphase Flow 89 (2017), p. 277-289
ISSN: 0301-9322
DOI: 10.1016/j.ijmultiphaseflow.2016.10.015

Friedrich W., Grzeszik R., Helmich M., Bossmeyer T., Wensing M.:
Characterization of High Pressure Natural Gas Injections for Stratified Operation of a Spark Ignited Engine by Simultaneous Fuel Concentration and Air Entrainment Measurements
18th Laser Lisbon Int. Symposium on Application of Laser Imaging Techniques to Fluid Mechanics (Lissabon, 4. July 2016 - 6. July 2016)
Kraemer M., Kull E., Wensing M.:
Flashboiling-induced targeting changes in gasoline direct injection sprays
In: International Journal of Engine Research 17 (2016), p. 97-107
ISSN: 1468-0874
DOI: 10.1177/1468087415604763
Michl J., Neumann J., Rottengruber H., Wensing M.:
Derivation and validation of a heat transfer model in a hydrogen combustion engine
In: Applied Thermal Engineering 98 (2016), p. 502-512
ISSN: 1359-4311
DOI: 10.1016/j.applthermaleng.2015.12.062
Rathmann W., Wensing M., Zepf S.:
Flipped classroom in interdisciplinary course
The 18th SEFI Mathematics working Group Seminar (Gothenburg, 27. June 2016 - 29. June 2016)
URL: http://www.math.chalmers.se/SEFIMWG2016/Book%20of%20accepted%20abstracts/part49.htm
Rezaei J., Rieß S., Wensing M.:
Phase Change in Diesel Spray at Supercritical Conditions: Investigation of Heat and Mass Transfer
4th Cavitation and Multi-phase flows Workshop, IICR conference (Crete)
Rieß S., Klima TC., Wensing M., Braeuer A.:
Influence of Bio-Diesel and Ethanol on the Diesel Engine Process Chain Investigated by Optical Measurement Techniques
ILASS – Europe 2016, 27th Annual Conference on Liquid Atomization and Spray Systems, 4-7 September 2016, Brighton, UK (Brighton, 4. September 2016 - 7. September 2016)
Salenbauch S., Storch M., Hain D., Wensing M., Hasse C., Zigan L., Will S.:
Experimental and numerical investigation on the effect of ethanol-based fuel mixtures on soot formation in gasoline direct-injection engines
36th International Symposium on Combustion (Seoul, 31. July 2016 - 5. August 2016)
Schumacher M., Wensing M.:
A Gasoline Fuelled Pre-Chamber Ignition System for Homogeneous Lean Combustion Processes
In: SAE Technical Papers 2016-October (2016)
ISSN: 0148-7191
DOI: 10.4271/2016-01-2176
Weiß L., Peter A., Rieß S., Wensing M.:
Phase transition and mixing behavior of a liquid Diesel spray injected into supercritical atmosphere
ILASS – Europe 2016, 27th Annual Conference on Liquid Atomization and Spray Systems, 4-7 September 2016, Brighton, UK (Brighton, 4. September 2016 - 7. September 2016)
Weiß L., Peter A., Wensing M.:
Diesel Spray characterization with Schlieren-Mie Technique
18th Laser Lisbon Int. Symposium on Application of Laser Imaging Techniques to Fluid Mechanics (Lissabon, 4. July 2016 - 7. July 2016)
Welß R., Bornschlegel S., Heldmann M., Wensing M., Mederer T.:
LIF Laser Scanning zur Untersuchung der Gemischbildung in Motoren mit reduziertem optischen Zugang
Motorische Verbrennung -- Aktuelle Probleme und moderne Lösungsansätze (XII. Tagung) (Ludwigsburg, 12. March 2015 - 13. March 2015)
Welß R., Wensing M.:
LIF Laser Scanning with pent roof illumination to Investigate Mixture Distribution in IC Engines with limited Optical Access
18th International Symposium on the Application of Laser and Imaging Techniques to Fluid Mechanics (Lissabon, 4. July 2016 - 7. July 2017)
URL: http://ltces.dem.ist.utl.pt/lxlaser/lxlaser2016/
Wensing M., Vogel T., Goetz G.:
Transition of diesel spray to a supercritical state under engine conditions
In: International Journal of Engine Research 17 (2016), p. 108-119
ISSN: 1468-0874
DOI: 10.1177/1468087415604281

Bhattacharya A., Banerjee DK., Mamaikin D., Datta A., Wensing M.:
Effects of Exhaust Gas Dilution on the Laminar Burning Velocity of Real-World Gasoline Fuel Flame in Air
In: Energy & Fuels 29 (2015), p. 6768-6779
ISSN: 0887-0624
DOI: 10.1021/acs.energyfuels.5b01299
Erdenkäufer S., Will S., Wensing M., Zigan L., Storch M.:
The Effect of Ethanol Blending on Combustion and Soot Formation in an Optical DISI Engine Using High-Speed Imaging
The 12th International Conference on Combustion and Energy Utilisation (Lancaster, 29. September 2014 - 3. October 2014)
DOI: 10.1016/j.egypro.2015.02.041
Friedrich W., Grzeszik R., Wensing M.:
Mixture Formation in a CNG-DI Engine in Stratified Operation
In: SAE Technical Papers 2015-September (2015)
ISSN: 0148-7191
DOI: 10.4271/2015-24-2474
Grasreiner S., Neumann J., Wensing M., Hasse C.:
A Quasi-dimensional Model of the Ignition Delay for Combustion Modeling in Spark-Ignition Engines
In: Journal of Engineering For Gas Turbines and Power-Transactions of the Asme 137 (2015), Article No.: 071502
ISSN: 0742-4795
DOI: 10.1115/1.4029100
Heldmann M., Bornschlegel S., Wensing M.:
Investigation of Jet-to-Jet Interaction in Sprays for DISI Engines
In: SAE Technical Papers 2015-September (2015)
ISSN: 0148-7191
DOI: 10.4271/2015-01-1899
Keller P., Knorsch T., Wensing M., Hasse C.:
Experimental and numerical analysis of iso-octane/ethanol sprays under gasoline engine conditions
In: International Journal of Heat and Mass Transfer 84 (2015), p. 497-510
ISSN: 0017-9310
DOI: 10.1016/j.ijheatmasstransfer.2015.01.011
Keller P., Knorsch T., Wensing M., Hasse C.:
The influence of differential evaporation on the structure of a three-component biofuel spray
In: International Journal of Engine Research 16 (2015), p. 610-626
ISSN: 1468-0874
DOI: 10.1177/1468087415573800
Krämer M., Kull E., Wensing M.:
Flash-Boiling induzierte Targeting Änderung bei GDI Sprays
Motorische Verbrennung -- Aktuelle Probleme und moderne Lösungsansätze (XII. Tagung) (Ludwigsburg, 12. March 2015 - 13. March 2015)
Rieß S., Vogel T., Wensing M.:
Influence of Exhaust Gas Recirculation on Ignition and Combustion of Diesel Fuel under Engine Conditions Investigated by Chemical Luminescence
13th International Conference on Liquid Atomization and Spray Systems (ICLASS) (Tainan, 23. August 2015 - 27. August 2015)
Salenbauch S., Storch M., Hain D., Hartl S., Wensing M., Hasse C., Zigan L., Will S.:
Minimiert Ethanol immer die Partikelbildung in Ottomotoren?
15th Conference „The Working Process of the Internal Combustion Engine“ (Graz, 24. September 2015 - 25. September 2015)
Schumacher M., Wensing M.:
Experimental Study on an Engine with Low Pressure Hydrogen Direct Injection
6th World Hydrogen Technologies Convention (Sydney, 11. October 2015 - 14. October 2015)
Storch M., Hinrichsen F., Wensing M., Will S., Zigan L.:
The effect of ethanol blending on mixture formation, combustion and soot emission studied in an optical DISI engine
In: Applied Energy 156 (2015), p. 783-792
ISSN: 0306-2619
DOI: 10.1016/j.apenergy.2015.06.030
Storch M., Kögl M., Wensing M., Zigan L.:
Study of Combustion and Soot Formation of DI-Spark Ignited Biofuel-Sprays in a Constant Volume Chamber
CLASS 2015 13th International Conference on Liquid Atomization and Spray Systems (Tainan, 23. August 2015 - 27. August 2015)
Storch M., Wensing M., Will S., Zigan L.:
Untersuchung des Einflusses von Ethanol-Beimischung auf rußende Verbrennungsvorgänge im BDE-Motor mittels High-Speed Visualisierung
In: 9. Tagung Diesel- und Benzindirekteinspritzung 2014, 2015, p. 491-506
ISBN: 9783658076498
DOI: 10.1007/978-3-658-07650-4_23
Storch M., Wensing M., Will S., Zigan L., Frenzel I., Voß S., Trimis D., Salenbauch S., Hasse C., Nitzer-Noski M., Kureti S.:
Biokraftstoffe und Rußbildung: Von der Charakterisierung in Laborflammen und optischen Motoren mit Benzindirekteinspritzung bis zur katalytischen GPF Regeneration
Motorische Verbrennung -- Aktuelle Probleme und moderne Lösungsansätze (XII. Tagung) (Ludwigsburg, 12. March 2015 - 13. March 2015)
Storch M., Wensing M., Zigan L., Will S.:
Analyse der Gemischbildung und der rußenden Verbrennung von Ethanol-Blends bei der Benzindirekteinspritzung
Thermodynamik-Kolloquium 2015 (Bochum, 5. October 2017 - 7. October 2015)
Storch M., Wensing M., Zigan L., Will S.:
Investigation of combustion and soot formation of ethanol-isooctane fuel blends in a DISI engine using optical measurement techniques
3rd International Conference of the Cluster of Excellence Tailor-Made Fuels from Biomass (Aachen, 23. June 2015 - 25. June 2015)
Vogel T., Rieß S., Wensing M.:
A Comparison of Worldwide Fuels and their Effects on Combustion under Constant Volume Vessel Conditions
In: SAE Technical Papers 2015-September (2015)
ISSN: 0148-7191
DOI: 10.4271/2015-01-1919
Welß R., Bornschlegel S., Wensing M.:
LIF Laser Scanning to Investigate Different Spray Characteristics and its Effect on the Mixture Formation in an DISI Engine
ICLASS 2015, 13th International Conference on Liquid Atomization and Spray Systems, Tainan, 2015 (Tainan, 23. August 2015 - 27. August 2015)
URL: http://iclass2015.tw/index.php?inter=about
Wensing M., Vogel T., Götz G.:
Reinstoffe und Stoffgemische unter motorisch relevanten, überkritischen Bedingungen
Motorische Verbrennung -- Aktuelle Probleme und moderne Lösungsansätze (XII. Tagung) (Ludwigsburg, 12. March 2015 - 13. March 2015)
Zigan L., Wensing M., Storch M., Will S.:
Untersuchung der Gemischbildung und rußenden Verbrennung von Ethanol-Isooktan-Gemischen bei der Benzindirekteinspritzung
27. Deutscher Flammentag (Clausthal-Zellerfeld, 16. September 2015 - 17. September 2015)

Grasreiner S., Neumann J., Luttermann C., Wensing M., Hasse C.:
A quasi-dimensional model of turbulence and global charge motion for spark ignition engines with fully variable valvetrains
In: International Journal of Engine Research 15 (2014), p. 805-816
ISSN: 1468-0874
DOI: 10.1177/1468087414521615
Knapp, D., Wurms, R., Budack, R., Wensing, M.:
Parameterstudie zur optimierten Auslegung einer Expansions¬maschine für Abgasenergienutzungssysteme in einem Pkw mit Ottomotor
9. Tagung Wärmemanagement des Kraftfahrzeugs (Potsdam, 5. June 2014 - 6. June 2014)
Knorsch T., Zackel A., Mamaikin D., Zigan L., Wensing M.:
Comparison of different gasoline alternative fuels in terms of laminar burning velocity at increased gas temperatures and exhaust gas recirculation rates
In: Energy & Fuels 28 (2014), p. 1446-1452
ISSN: 0887-0624
DOI: 10.1021/ef4021922
Krämer M., Kull E., Heldmann M., Wensing M.:
Investigations on Gasoline Spray Propagation Behaviour Characteristic for Multihole Injectors
In: SAE Technical Papers 2014-October (2014)
ISSN: 0148-7191
DOI: 10.4271/2014-01-2732
Mederer T., Friedrich W., Trost J., Zigan L., Wensing M.:
Simultaneous spatially resolved visualization of fuel/air ratio and residual gas distribution in an optically accessible SI engine
In: 14. Internationales Stuttgarter Symposium, 2014, p. 349-372
ISBN: 9783658051297
DOI: 10.1007/978-3-658-05130-3_25
Schumacher M., Wensing M.:
Investigations on an Injector for a Low Pressure Hydrogen Direct Injection
In: SAE Technical Papers 2014-October (2014)
ISSN: 0148-7191
DOI: 10.4271/2014-01-2699
Storch M., Wensing M., Will S., Zigan L.:
Systematic Investigation of the Influence of Ethanol Blending on Sooting Combustion in DISI Engines Using High-speed Imaging and LII
SAE 2014 International Powertrains, Fuels and Lubricants Meeting (Birmingham, 20. October 2014 - 23. October 2014)
Storch M., Zigan L., Wensing M., Will S.:
Investigation of the Combustion and Sooting Behavior of Ethanol-Blended DISI-Sprays in a Constant-Volume Chamber
35th International Symposium on Combustion (San Francisco, 3. August 2014 - 8. August 2014)
Storch M., Zigan L., Wensing M., Will S.:
Systematic Investigation of the Influence of Ethanol Blending on Sooting Combustion in DISI Engines Using High-Speed Imaging and LII
SAE 2014 International Powertrains, Fuels and Lubricants Meeting, FFL 2014
DOI: 10.4271/2014-01-2617
Welss, R., Mederer, T. Heldmann, M., Wensing, M.:
Mixture formation in DISI Engines investigated for conventional multi-hole and colliding-jet injectors by a new LIF technique
THIESEL 2014 Conference on Thermo- and Fluid Dynamic Processes in Direct Injection Engines (Valencia, 9. September 2014 - 12. September 2014)
Wensing M., Günther M., Zboralski A., Liebsch S.:
Endoskopische laserinduzierte Fluoreszenz in der Brennverfahrensentwicklung
In: MTZ Motortechnische Zeitschrift 75 (2014), p. 44-51
ISSN: 0024-8525
DOI: 10.1007/s35146-014-0364-y
Zigan L., Storch M., Wensing M., Will S.:
Systematische Untersuchungen zum Einfluss der Ethanolzumischung auf die rußende Verbrennung bei der Benzindirekteinspritzung
9. Haus der Technik Tagung Diesel- und Benzindirekteinspritzung (Berlin, 3. October 2014 - 4. October 2014)

Bauer M., Wurms R., Budack R., Wensing M.:
Bewertung von Motorkonzepten mit mehreren Arbeitsräumen
Motorische Verbrennung- Aktuelle Probleme und moderne Lösungsansätze (XI. Tagung) (Ludwigsburg, 14. March 2013 - 15. March 2013)
Bräuer L., Zigan L., Fröba AP., Wensing M., Leipertz A., Will S.:
Optical imaging techniques in engineering thermodynamics
Kick-off Symposium Optical Imaging Center Erlangen (Erlangen, 26. September 2013 - 27. September 2013)
Gostic I., Wensing M.:
Profilrelaxation des düsennahen Einspritzstrahles
Haus der Technik - International Congress Motorische Verbrennung Engine Combustion Aktuelle Probleme und moderne Lösungsansätze (XI. Tagung) (Ludwigsburg, 14. March 2013 - 15. March 2013)
Held F., Bornschlegel S., Rieß S., Vogel T., Wensing M.:
Time and Spatially Resolved Measurements of the Interaction between Liquid and Combusting Diesel Spray and Walls in Modern Diesel Engine Conditions
DOI: 10.4271/2013-24-0063
Held F., Werblinski T., Vogel T., Wensing M.:
Untersuchung der Wechselwirkungen von flüssigem und verbrennendem Dieselkraftstoff mit Wänden unter hohen Temperaturen und Drücken
Motorische Verbrennung- Aktuelle Probleme und moderne Lösungsansätze (XI. Tagung) (Ludwigsburg, 14. March 2015 - 15. March 2015)
Heldmann M., Knorsch T., Wensing M.:
Investigation of fuel atomization and evaporation of a DISI injector spray under homogeneous charge conditions
In: SAE International Journal of Engines 6 (2013), p. 1213-1221
ISSN: 1946-3936
DOI: 10.4271/2013-01-1597
Heldmann, M., Wensing, M., Wanner, S., Franz, S., Schneider, S., Handtmann, A.:
Untersuchung von Zwillingsstrahl-Sprays für den Einsatz in DI Ottomotoren
HdT Tagung Ludwigsburg (Ludwigsburg, 14. March 2013 - 15. March 2013)
Knapp D., Wurms R., Budack R., Wensing M.:
Auslegung eines Abwärmenutzungssystems unter den Randbedingungen eines Pkw-Antriebs mit Ottomotor
Der Arbeitsprozess des Verbrennungsmotors (14. Tagung) (Graz, 24. September 2013 - 25. September 2013)
Knorsch T., Demmelmeyer M., Wensing M., Leipertz A.:
A novel heat flux burner system to determine the laminar flame velocity of liquid fuels
In: Fuel Processing Technology 107 (2013), p. 119-125
ISSN: 0378-3820
DOI: 10.1016/j.fuproc.2012.07.016
Knorsch T., Heldmann M., Zigan L., Wensing M., Leipertz A.:
On the role of physiochemical properties on evaporation behavior of DISI biofuel sprays
In: Experiments in Fluids 54 (2013), Article No.: 1522
ISSN: 0723-4864
DOI: 10.1007/s00348-013-1522-6
Knorsch T., Storch M., Zigan L., Wensing M.:
Comparison of the Spray Evaporation and Inflammation of Alternative Fuels for Late Injection Timing Mode
25th European Conference on Liquid Atomization and Spray Systems (Chania, 1. September 2013 - 4. September 2013)
Knorsch, Tobias, Zackel, Andreas, Mamaikin, Dmitrii, Zigan, Lars, Wensing, Michael:
Ignitability and gas temperature dependent flame velocities of isooctane, n-heptane, ethanol and n-butanol
European Combustion Meeting 2013 (Lund, 25. June 2013 - 28. June 2013)
Knorsch T., Zigan L., Wensing M., Leipertz A.:
Impact of biofuel physiochemical properties on the DISI reaction chain
6th TMFB International Workshop & 1st International Conference of the Cluster of Excellence Tailor-Made Fuels from Biomass (Aachen, 18. June 2013 - 20. June 2013)
Mederer T., Trost J., Storch M., Zigan L., Wensing M., Leipertz A.:
Investigation of the interaction of charge motion and residual gas concentration in an optically accessible SI engine
11th International Conference on Engines & Vehicles: ICE 2013 (Capri, 15. September 2013 - 19. September 2013)
Mederer T., Wensing M., Leipertz A.:
Investigation of the interaction of charge motion and residual gas concentration in an optically accessible SI engine
In: SAE Technical Papers 2 (2013)
ISSN: 0148-7191
DOI: 10.4271/2013-01-0558
Schumacher M., Mederer T., Wensing M.:
Investigations on a new engine concept for small hydrogen power generation units using LOHCs
In: SAE Technical Papers 11 (2013)
ISSN: 0148-7191
DOI: 10.4271/2013-01-2525
Storch M., Knorsch T., Zigan L., Wensing M., Will S.:
High-speed Imaging of DI-spark-ignition Processes and Sooting Combustion for Ethanol-gasoline Fuel Blends
European Combustion Meeting 2013 (Lund, 25. June 2013 - 28. June 2013)
Storch M., Knorsch T., Zigan L., Wensing M., Will S.:
High-speed imaging of the sooting combustion of ethanol-gasoline blended fuel sprays under DISI cold start conditions
25th European Conference on Liquid Atomization and Spray Systems ILASS 2013 (Chania, Kreta, 1. September 2013 - 4. September 2103)
Storch M., Zigan L., Wensing M., Will S.:
High-Speed Visualisierung von Verbrennungsvorgängen bei der Benzindirekteinspritzung für verschiedene Ethanol-Ottokraftstoff Gemische
26. Deutscher Flammentag (Duisburg, 11. September 2013 - 12. September 2013)
Storch M., Zigan L., Wensing M., Will S.:
High-Speed Visualization von Verbrennungsvorgängen bei der Benzin-Direkt-Einspritzung für verschieden Ethanol-Ottokraftstoff-Gemische
26. Deutscher Flammentag (Duisburg, 11. September 2013 - 12. September 2013)
In: VDI-Berichte Nr. 2161, S. 387 – 395 2013
Vogel T., Götz G., Wensing M.:
Phasenübergang von Kraftstoffkomponenten in Motorprozessen
Motorische Verbrennung - Aktuelle Probleme und moderne Lösungsansätze (XI. Tagung) (Ludwigsburg, 14. March 2013 - 15. March 2013)
Vogel T., Götz G., Wensing M.:
Transition of Fuel Components into Supercritical State under Diesel Process Conditions
25th European Conference on Liquid Atomization and Spray Systems (Chania, 1. September 2013 - 4. September 2013)
Vogel T., Rieß S., Flügel A., Wensing M.:
Soot formation of different diesel-fuels investigated by chemical luminescence and laser induced incandescence
In: SAE Technical Papers 11 (2013)
ISSN: 0148-7191
DOI: 10.4271/2013-01-2667
Wensing M., Mederer T., Leipertz A.:
Untersuchung der Gemischbildung in einem optisch zugänglichen Wasserstoffmotor mittels laserinduzierter Fluoreszenz
Haus der Technik - International Congress Motorische Verbrennung Engine Combustion Aktuelle Probleme und moderne Lösungsansätze (XI. Tagung) (Ludwigsburg, 14. March 2013 - 15. March 2013)

Bauer M., Wurms R., Budack R., Wensing M.:
Potenziale von Ottomotoren mit einem zusätzlichen Expansionszylinder Ladungswechsel im Verbrennungsmotor
Ladungswechsel im Verbrennungsmotor (Stuttgart, 23. October 2012 - 24. October 2012)
Held F., Vogel T., Wensing M., Werblinski T.:
Time and Spatially Resolved Measurements of the Interaction of Combusting Diesel Spray and Walls with Elevated Temperatures
In: SAE International Journal of Engines 5 (2012), p. 1709-1716
ISSN: 1946-3936
DOI: 10.4271/2012-01-1726
Held F., Wensing M.:
Diesel-Sprayverhalten und Flamme-Wand-Interaktion bei hohen Temperaturen und Drücken
10. Symposium Trends in der Motorentechnologie (Passau, 7. November 2012 - 7. November 2012)
Heldmann M., Wensing M., Wanner S., Franz S., Schneider S., Handtmann A.:
Investigations of Twin-Jet Sprays for DISI Engine Conditions
12th International Conference on Liquid Atomization and Spray Systems (Heidelberg, 2. September 2012 - 6. September 2012)
Knorsch T., Heldmann M., Hagedorn T., Wensing M., Leipertz A.:
Influence of Key Biofuels on the DISI Spray Evaporation Rate by Phase Doppler Anemometry
16th Int. Symposium on Applications of Laser Techniques to Fluid Mechanics (Lisbon, 9. July 2012 - 12. July 2012)
Knorsch T., Trost J., Zigan L., Wensing M., Leipertz A.:
Quantitative DISI spray vapor temperature study for different biofuels by two-line excitation laser-induced fluorescence
In: SAE Technical Papers 9 (2012)
ISSN: 0148-7191
DOI: 10.4271/2012-01-1658
Knorsch T., Zigan L., Trost J., Wensing M., Leipertz A.:
Biofuel Droplet Evaporation Rate of a DISI Spray by Laser-induced Fluorescence and Phase Doppler Anemometry
12th Triennial Int. Conference on Liquid Atomization and Spray Systems (ICLASS) (Heidelberg, 2. September 2012 - 6. September 2012)
Marcic M., Avsec J., Praunseis Z., Marcic S., Wensing M., Leipertz A.:
Self-ignition calculation of diesel spray
In: SAE Technical Papers (2012)
ISSN: 0148-7191
DOI: 10.4271/2012-01-1262
Mederer T., Möller A., Wensing M., Leipertz A.:
Untersuchung der Wechselwirkung von Ladungsbewegung und Restgaskonzentration am DI-Ottomotor mit optischen Messtechniken
Ladungswechsel im Verbrennungsmotor (Stuttgart, 23. October 2012 - 24. October 2012)
Mederer T., Wensing M., Leipertz A.:
Laser-Induced Fluorescence to Visualize Gas Mixture Formation in an Optically Accessible Hydrogen Engine
Eighth International Conference on Modeling and Diagnostics for Advanced Engine Systems (Fukuoka, 23. July 2012 - 26. July 2012)
Meyer BJ., Pöhler M., Staupendahl G., Wensing M., Vogel T., Lutz M., Rottenkolber G., Spang C., Berndt F.:
Neues CO2-Laserbohrverfahren für Dieseleinspritzdüsen: Alternative Lochgeometrien und die Auswirkungen auf Spray, Gemischbildung und Verbrennung
8. Tagung Diesel- und Benzindirekteinspritzung (Berlin, 28. November 2012 - 29. November 2012)
Neumann S., Hasse C., Grasreiner S., Kleemann A., Hussmann B., Heinisch A., Durst B., Koch P., Mederer T., Knorsch T., Wensing M.:
Laser-Optical and Numerical Study of Mixture Formation in a GDI Engine with High Tumble Motion
Thermo and fluid dynamic processes in direct injection engines (Valencia, 11. September 2012 - 14. September 2012)
Vogel T., Wensing M.:
FL1-4 Effects of fuel composition on spray ignition under engine relevant conditions(FL: Fuels,General Session Papers)
In: The Proceedings of the International symposium on diagnostics and modeling of combustion in internal combustion engines 2012
DOI: 10.1299/jmsesdm.2012.8.317
Vogel T., Wensing M., Lutz M., Klaua T., Wassermann G.:
Mixture formation and ignition investigation of medium speed diesel engine CR injectors under constant pressure and temperature conditions
Heavy-Duty-, On- und Off-Highway-Motoren (Nürnberg, 6. November 2012 - 7. November 2012)
Zigan L., Ammon M., Schmitz I., Wensing M., Leipertz A., Gupta V.:
Investigation of fuel effects on spray atomization and evaporation studied for a multi-hole DISI injector with a late injection timing
In: SAE International Journal of Fuels and Lubricants 5 (2012), p. 254-264
ISSN: 1946-3952
DOI: 10.4271/2011-01-1982
Zigan L., Schmitz I., Wensing M., Leipertz A.:
Reynolds number effects on atomization and cyclic spray fluctuations under gasoline direct injection conditions
In: Woodhead Publishing (ed.): Fuel Systems for IC Engines, 2012
ISBN: 978-0-85709-210-6

Birkigt A., Michels K., Theobald J., Seeger T., Gao Y., Weikl MC., Wensing M., Leipertz A.:
Investigation of compression temperature in highly charged spark-ignition engines
In: International Journal of Engine Research 12 (2011), p. 282-292
ISSN: 1468-0874
DOI: 10.1177/1468087411399216
Flügel, A. Zigan, L., Schmitz, I., Wensing, M., Leipertz, A.:
Modell zur Berechnung der Eindringtiefe unter Berücksichtigung der Kraftstoffverdampfung, Motorische Verbrennung
Motorische Verbrennung – aktuelle Probleme und moderne Lösungsansätze (München, 24. March 2011 - 25. March 2011)
Heldmann M., Knorsch T., Schmitz I., Wensing M., Leipertz A.:
Investigation of significant Spray Rotation Phenomena under Flash-Boiling Conditions studied on a Multi-hole DISI-Injector for Bio-Ethanol E85 and Gasoline E5
23ND ANNUAL CONFERENCE ON LIQUID ATOMIZATION AND SPRAY SYSTEMS (Ventura, 15. May 2011 - 18. May 2011)
Lai MC., Zheng Y., Shost M., Xie X., Matsumoto A., Wang J., Zhang X., Moon S., Gao J., Fezzaa K., Zigan L., Schmitz I., Wensing M., Leipertz A.:
Characterization of internal flow and spray of multihole di gasoline spray using X-ray imaging and CFD
In: SAE Technical Papers (2011)
ISSN: 0148-7191
DOI: 10.4271/2011-01-1881
Vogel T., Rieß S., Lutz M., Wensing M., Leipertz A.:
Comparison of current Spray models under high pressure and high temperature engine relevant conditions
24th European Conference on Liquid Atomization and Spray Systems (ILASS-Europe) (Estoril, 5. September 2011 - 7. September 2011)
Vogel T., Rieß S., Lutz M., Wensing M., Leipertz A.:
Influence of fuel mixture on spray formation in diesel processes
23rd Annual Conference on Liquid Atomization and Spray Systems (Brno, Czech Rep, 6. September 2010 - 9. September 2010)
Vogel T., Rieß S., Wensing M., Leipertz A., Lutz M.:
Numerische Analyse der Sprayausbreitung bei der Kraftstoffeinspritzung in Verbrennungsmotoren
Tagung Motorische Verbrennung im Haus der Technik (München, 24. March 2011 - 25. March 2011)
Vogel T., Wensing M., Leipertz A., Iannuzzi S., Lutz M.:
Einfluss der Einspritzmenge auf das Spray- und zündverhalten in Dieselprozessen
Motorische Verbrennung – aktuelle Probleme und moderne Lösungsansätze (München, 24. March 2011 - 25. March 2011)
Vogel T., Wensing M., Leipertz A., Iannuzzi S., Lutz M.:
Influence of the fuel quantity on the spray formation and ignition under current engine relevant conditions
In: SAE Technical Papers (2011)
ISSN: 0148-7191
DOI: 10.4271/2011-01-1928
Zigan L., Schmitz I., Flügel A., Wensing M., Leipertz A.:
Structure of evaporating single- and multicomponent fuel sprays for 2nd generation gasoline direct injection
In: Fuel 90 (2011), p. 348-363
ISSN: 0016-2361
DOI: 10.1016/j.fuel.2010.08.001
Zigan L., Schmitz I., Wensing M., Leipertz A.:
Experimentelle und numerische Untersuchung zum Einfluss der Kraftstoffeigenschaften auf die Düseninnenströmung und den Strahlaufbruch bei der Benzindirekteinspritzung
Motorische Verbrennung – aktuelle Probleme und moderne Lösungsansätze (München, 24. March 2011 - 25. March 2011)

Dias Flügel A., Zigan L., Schmitz I., Wensing M., Leipertz A.:
Semi-Empirical Model to Calculate Spray Length Considering Evaporation Effect
23rd Annual Conference on Liquid Atomization and Spray Systems (Brno, 6. September 2010 - 9. September 2010)
Koch P., Löffler M., Wensing M., Leipertz A.:
Study of the mixture formation processes inside a modern direct-injection gasoline engine
In: International Journal of Engine Research 11 (2010), p. 455-471
ISSN: 1468-0874
DOI: 10.1243/14680874JER606
Marcic M., Avsec J., Wensing M., Schmid M., Leipertz A., Fettes C.:
Calculation and measurements of self-ignition nuclei in diesel combustion
In: Energy & Fuels 24 (2010), p. 811-820
ISSN: 0887-0624
DOI: 10.1021/ef900695w
Schäfer, J.; Zwahr, S; Wensing, M.; Tanasie, C.:
3cam -continuously variable cam shifting valve train
CONAT 2010 International congress on Automotive and Transport Engineering (Brasov, 27. October 2010 - 29. October 2010)
Vogel T., Lutz M., Wensing M., Leipertz A.:
Influence of fuel mixture on spray formation in diesel processes
23rd Annual Conference on Liquid Atomization and Spray Systems (Brno, 6. September 2010 - 9. September 2010)
Vogel, Thomas; Lutz, Michael; Wensing, Michael; Leipertz, Alfred:
Influence of the fuel composition on diesel spray development under engine conditions
Conference on Thermo- and Fluid Dynamic Processes in Diesel Engines (Valencia, 14. September 2010 - 17. September 2010)
Gostic, I.; Senghaas, C.; Willmann, M.; Wensing, M.:
How biodiesel/diesel fuel blends affect spray breakup and emissions
23rd Annual Conference on Liquid Atomization and Spray Systems (Brno, 6. September 2010 - 9. September 2010)
Zigan, L.; Schmitz, I.; Flügel, A.; Wensing, M.; Leipertz, A.:
Influence of fuel properties on spray formation and evaporation
Indo-German Seminar on Future Mobility (New Dehli, 26. February 2010 - 27. February 2010)
Zigan, L.; Schmitz, I.; Flügel, A.; Wensing, M.; Leipertz, A.:
Structure of evaporating single- and multi-component fuel sprays for DISI-engines
33rd International Symposium on Combustion (Beijing, 1. August 2010 - 6. August 2010)
Zigan L., Schmitz I., Flügel A., Knorsch T., Wensing M., Leipertz A.:
Effect of fuel properties on spray breakup and evaporation studied for a multihole direct injection spark ignition injector
In: Energy & Fuels 24 (2010), p. 4341-4350
ISSN: 0887-0624
DOI: 10.1021/ef1003914
Zigan, L.; Schmitz, I.; Wensing, M.; Leipertz, A.:
Effect of fuel properties on primary breakup and spray formation studied on a gasoline 3-hole nozzle
23rd Annual Conference on Liquid Atomization and Spray Systems (Brno, 6. September 2010 - 9. September 2010)

Dias Flügel A., Zigan L., Schmitz I., Wensing M., Leipertz A., Lutz M.:
Entwicklung eines analytischen Spraymodells für Direkteinspritzung
Motorische Verbrennung Aktuelle Probleme und moderne Lösungsansätze (IX. Tagung) (München, 19. March 2009 - 20. March 2009)
Gostic I., Schmidt RM., Senghass C., Wensing M.:
Charakterisierung von Diesel-Einspritzstrahlen für Großmotoranwendungen
Charakterisierung von Diesel-Einspritzstrahlen für Großmotoranwendungen (München, 19. March 2009 - 20. March 2009)
Kühling K., Kleine Jäger F., Wensing M., Schmid M., Held F.:
Kraftstoffeinflüsse auf den Dieselmotorischen Prozessablauf
Motorische Verbrennung – aktuelle Probleme und moderne Lösungsansätze (München, 19. March 2009 - 20. March 2009)
Lutz M., Dias Flügel A., Zigan L., Wensing M., Leipertz A.:
Untersuchung der Dieselsprayausbreitung und -verdampfung unter realistischen Druck- und Temperaturbedingungen
Motorische Verbrennung – aktuelle Probleme und moderne Lösungsansätze (München, 19. February 2009 - 20. March 2009)
Schäfer J., Zwahr S., Wensing M.:
INA 3Cam: ein neuartiges System zur mechanisch vollvariablen Ventilsteuerung INA 3Cam: an innovative system for mechanical fully variable valve actuation
Tagung Variable Ventiltriebe
Wensing M.:
Optical Investigation of DI Diesel Jets and Diesel Engine Combustion
5th Int. SAOT Workshop on Optical Metrology (Erlangen, 23. March 2009 - 24. March 2009)
Zigan L., Dias Flügel A., Schmitz I., Wensing M., Leipertz A.:
Charakterisierung von Benzindirekteinspritzprozessen mit analytischen und numerischen Modellen basierend auf optischer Spraydiagnostik
Thermodynamik-Kolloquium und Ingenieurdaten (Berlin, 5. October 2009 - 7. October 2009)
Zigan L., Dias Flügel A., Schmitz I., Wensing M., Leipertz A.:
Einfluss der Kraftstoffeigenschaften auf die Sprayausbreitung und -verdampfung bei Piezo-Einspritzventilen
Motorische Verbrennung Aktuelle Probleme und moderne Lösungsansätze (IX. Tagung) (München, 19. March 2009 - 20. March 2009)
Zigan L., Schmitz I., Dias Flügel A., Wensing M., Leipertz A.:
Influence of the fuel properties on spray formation and evaporation measured on a piezoelectric injector for 2nd generation gasoline direct injection
Conference Injection Systems for IC Engines (London, 13. May 2009 - 14. May 2009)
Zigan, L.; Schmitz, I.; Flügel, A.; Wensing, M.:
Structure of evaporating single and multi component fuel sprays for gasoline direct injection
Gordon Research Conference (Waterville Valley, 26. July 2009 - 31. July 2009)

Schmid M., Kaiser M., Koch P., Wensing M., Leipertz A.:
Optical investigations on partially premixed diesel combustion for different operating parameters
In: SAE Technical Papers (2008)
ISSN: 0148-7191
DOI: 10.4271/2008-01-0041
Schmid M., Koch P., Wensing M., Leipertz A.:
HC3-2: Influence of Different Fuels on Partially Premixed Combustion Inside a Common Rail DI-Diesel-Engine(HC: HCCI Combustion,General Session Papers)
DOI: 10.1299/jmsesdm.2008.7.313

Koch P., Wensing M., Leipertz A., Lutz M., Ipp W.:
Einfluss von Temperatur und Druck auf das Ausbreitungsverhalten von Dieselsprays
Motorische Verbrennung – aktuelle Probleme und moderne Lösungsansätze (München, 15. March 2007 - 16. March 2007)
Leipertz A., Wensing M.:
Modern optical diagnostics in engine research
3rd Int. Conference on Optical and Laser diagnostics (London, 22. May 2007 - 25. May 2007)
Wensing M., Koch P., Schmid M., Bräuer A., Lutz M., Leipertz A.:
Laserdiagnostik zur Untersuchung direkteinspritzenden Brennverfahren
In: Prof. Dr. Ing. Ulrich Brill (ed.): Direkteinspritzung im Ottomotor VI, 2007, p. S. 1 – 13
ISBN: 978-3-8169-2716-7

Ipp W., Wensing M., Leipertz A.:
Motorische Verbrennung – aktuelle Probleme und moderne Lösungsansätze
Grundlagen und moderne Anwendungen der Verbrennungstechnik (Erlangen, 20. March 2006 - 23. March 2006)

P. Kreuter, P. Heuser, M. Wensing, R. Bey, C. Fettes:
Impulse charging for diesel engines: Improved performance characteristic and inside-engine measures to meet future emission legislation
In: SAE Technical Papers (2004)
ISSN: 0148-7191
DOI: 10.4271/2004-01-1406

Kreuter P., Heuser P., Wensing M., Bey R.:
An impulse charging system for SI and diesel engines
In: SAE Technical Papers (2002), Article No.: 2002-01-1104
ISSN: 0148-7191
DOI: 10.4271/2002-01-1104

Hartmann M., Höffner J., Schenk M., Reisenweber KU., Beyrau F., Egermann J., Ipp W., Krämer H., Rabenstein F., Wagner V., Wensing M., Leipertz A.:
Erforschung der Auswirkungen von Restgas im Motorzylinder auf den Brennverlauf und die NOx-Bildung - Einfluß der Ladungsschichtung und Abgasrückführung auf das Emissionsverhalten von DI-Ottomotoren
Laserdiagnostische und plasmatechnologische Grundlagen zur Verminderung von Emissionen und Kraftstoffverbrauch von DI-Verbrennungsmotoren (Düsseldorf, 27. September 2000 - 27. September 2000)

Egermann J., Ipp W., Rabenstein F., Wensing M., Leipertz A.:
Spray formation and evaporation of pressure swirl atomizers for gasoline direct injection
15th ILASS (Toulouse, 15. July 1999 - 17. July 1999)
Ipp W., Wagner V., Egermann J., Rabenstein F., Wensing M., Leipertz A.:
Laser measurement techniques optimized for the investigation of DI gasoline engines
Joint Meeting of the British, German and French sections of the Combustion Institute (Nancy)
Wagner V., Ipp W., Wensing M., Leipertz A.:
Fuel distribution and mixture formation inside a direct injection SI engine investigated by 2D mie and lief techniques
In: SAE Technical Papers (1999)
ISSN: 0148-7191
DOI: 10.4271/1999-01-3659
Wensing M., Ipp W., Krämer H., Wagner V., Rabenstein F., Egermann J., Leipertz A.:
Analyse der Strahlausbreitung und Gemischbildung in der Benzindirekteinspritzung
Motorische Verbrennung – aktuelle Probleme und moderne Lösungsansätze (Essen, 16. March 1999 - 17. March 1999)
Wolfgang Ipp, Volker Wagner, Hanno Krämer, Michael Wensing, Alfred Leipertz, Stefan Arndt, Amar K. Jain:
Spray formation of high pressure swirl gasoline injectors investigated by two-dimensional mie and LIEF techniques
In: SAE Technical Papers (1999)
ISSN: 0148-7191
DOI: 10.4271/1999-01-0498
Wensing M., Juutinen S., Münch KU.:
Ottokraftstoffe: Einfluß von Kraftstoff-Sauerstoff auf die NOx-Emissionen
Motorische Verbrennung – aktuelle Probleme und moderne Lösungsansätze (Essen, 16. March 1999 - 17. March 1999)

Ipp W., Nuyken K., Wensing M., Leipertz A.:
Ermittlung von Strahlparametern für Sprays der Benzindirekteinspritzung
Workshop SPRAY ’98 (Essen, 13. October 1998 - 14. October 1998)
Krämer H., Wensing M., Leipertz A.:
Anwendungen zweidimensionaler Laser-Lichtschnitt-Techniken im Saugkanal und Brennraum eines 4-Ventil-Ottomotors: Einfluß unterschiedlicher Injektortypen auf Gemischaufbereitung und Verbrennung
3. Internationales Indiziersymposium (Mainz, 21. April 1998 - 22. April 1998)
Stach T., Wensing M., Münch KU., Leipertz A.:
Zweidimensionale quantitative Bestimmung der Tropfengröße in Sprays
In: Chemie Ingenieur Technik (1998)
ISSN: 0009-286X
Juha Pentikäinen, Michael Wensing, Sami Juutinen, Kai Uwe Münch, Alfred Leipertz:
Gasoline: Influence of fuel-oxygen on NOx-emissions
In: SAE Technical Papers (1998)
ISSN: 0148-7191
DOI: 10.4271/981366
Wensing M., Stach T., Münch KU., Leipertz A.:
Two-dimensional droplet size distribution measurements in two-phase flows
7th European Symposium Particle Characterization (Nürnberg, 10. March 1998 - 12. March 1998)

Leipertz A., Münch KU., Fath AO., Hofmann D., Rabenstein F., Wensing M.:
Quantitative zweidimensionale Laser-Streulicht-Messungen in technischen Verbrennungssystemen
Lasergestützte Verbrennungsdiagnostik (München, 18. June 1997 - 19. June 1997)
Münch KU., Schünemann E., Wensing M., Leipertz A.:
Laser-Streulichttechniken zur Untersuchung der ottomotorischen Gemischbildung
8. Int. Kongreß Meß- und Versuchstechnik im Automobilbau (Böblingen, 9. April 1997 - 11. April 1997)
Wensing M., Münch KU., Leipertz A.:
Characterisation of port fuel injection sprays
7th Int. Conf. on Liquid Atomization and Spray Systems (Seoul, 18. August 1997 - 22. August 1997)
Wensing M., Münch KU., Leipertz A.:
Characteristics and application of gasoline injectors to SI engines by means of measured liquid fuel distributions
In: SAE Technical Papers (1997)
ISSN: 0148-7191
DOI: 10.4271/972947
Wensing M., Münch KU., Leipertz A., Schäck S.:
Untersuchung der ottomotorischen Gemischbildung im Saugkanal und Brennraum
Motorische Verbrennung - aktuelle Probleme und moderne Lösungsansätze (Essen, 18. March 1997 - 19. March 1997)

Münch KU., Wensing M., Leipertz A.:
Charakterisierung von Benzineinspritzventilen mit digitaler Bildverarbeitung
Spray ‘96 (Bremen, 4. June 1996 - 5. June 1996)
Münch KU., Wensing M., Leipertz A.:
Schnelle Charakterisierung von Mehrstoffdüsen mit einem zweidimensionalen Streulichtverfahren
In: Chemie Ingenieur Technik (1996)
ISSN: 0009-286X
Münch KU., Wensing M., Leipertz A.:
Untersuchung zur Verbesserung des Kaltstart- und Instationärverhaltens von Ottomotoren mit Hilfe zweidimensionaler Streulichttechnik
2. Indiziersymposium (Offenbach, 7. May 1996 - 8. May 1996)
Wensing M., Münch KU., Leipertz A.:
Charakterisierung von Einspritzventilen für Ottomotoren mit einer kombinierten Lichtschnitttechnik
5 GALA-Fachtagung „Lasermethoden in der Strömungs¬meßtechnik“ (Berlin, 11. September 1996 - 13. September 1996)

Münch KU., Wensing M., Krämer H., Leipertz A.:
Untersuchung der Gemisch-bildung in 4-Ventil-Ottomotoren mittels zweidimensionaler (2D) Laserdiagnostik
17. Deutscher Flammentag (Hamburg, 12. September 1995 - 13. September 1995)

Michael Wensing

Prof. Dr.-Ing. Michael Wensing

Office hours

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2004

2002

2000

1999

1998

1997

1996

1995